So, I did something wrong! Just looking for advice now on how to fix. Deck would is 3 years old. Stain in picture was 2 coats 20 minutes apart. Weather was 70s ...

Oct 7, 2001 ... Getting set to paint my deck - it's all FRP - some plain edges, etc but mostly diamond nonskid. Will use 2 part LP on epoxy primer. It's

Aug 13, 2016 ... > a gallon of their wall paint, once. > So then the rest of this is rant against HD paint is based on what exactly? What other advice do you ...

why it is not a good idea. I already tried this on some old treated pine deck boards I used to ... You should be using Decking products, following instructions ...

Worst case it would have been in the laminate. Luckily it was the former. We ground out the old filler around the entire boat, being careful so as not to damage ...

now i dont know if this is the correct way, but on an old one i refurbished i used epoxy porch and deck paint for under the waterline and automotive

I could almost swear, Derby, you have been on roll lately :) LOL. Ed ... of old answers from five years ago. You can tell from the hair styles, and ...

Sep 26, 2020 ... The plan is to repair the various bits of wear and tear and old ding repairs, repaint and new deck pad. ... I can post you some corecell offcuts ...

May 7, 2015 ... Because we are on a corner lot with a very wide open yard, anyone who drives by can see our deck and the terrible shape it is in. Knowing that ...

You might be able to glue the new piece on without removing the old, but you will have to be careful to not get glue on the deck. ... over the joint, fair/paint ...

>clear finish - the mahogany wood showing, what clear finish should I use? We used the CWF sealer on our mahogany deck, which is exposed to the. New Hampshire ...

You might be able to glue the new piece on without removing the old, but you will have to be careful to not get glue on the deck. ... over the joint, fair/paint ...

Jan 12, 2022 ... is that I can likely cut off the damage above deck and make a new ... mounting it over the old one which already had four screw holes that

Jul 10, 2004 ... On the deck, you can use most any ol' brush or roller. What you are ... If there is any old paint on the piece, and I think you ...

strip and re-varnish deck, rip out rear thwart and floorboards, stiffen floor with foam and glass over... should bring these two old MK1 Herons right up to ...

Aug 11, 2013 ... All you can do is fill the hole. nestork's profile photo ... > existing joists with one of the following before fastening new decking:

We had to paint afterwards, but I wonder if he could have used Gelcoat ... You can't use gelcoat on top of epoxy. He could have laminated the new core ...

Nov 20, 2021 ... it is great if you are going to paint or stain the deck dark. Since ... As you can see from the photo montage above, the diagonal knees ...

I feel the need to keep on racing to provide an example to 'Old people' to get out there and do it while you can. Bit I digress, I met up with Graham who is ...

Dec 6, 2003 ... What kind of screws should I use (galvanized deck screws, stainless steel)?. Background info: The house is 16 years old, on it's orignal paint ( ...