It can repair some engine block / head gasket problems. The car is 14 ... does-k-seal-work/ Seen Wonderweld solve a full mayonnaise head gasket on a ...

and another head gasket refitted. ... But isn't K-seal supposed to be a cut above the more usual Radweld goop?. 'K-Seal: Antifreeze compatible permanent cooling ...

> ...but a marine toilet is a working piece of machinery that > doesn't do anything unless it's working. > we'll. > discuss preventive maintenance ...

If air does come out, then the problem is probably something clogging the head assembly. ... Just replace the gasket. I've also found that a little lip ...

... engine repair place today to ... head gasket problem in > the first place... It's a 2-stroke weedeater. 99.99% chance that it does not have a separate head.

situation? 8. My father has the factory service manual and told me it did not look like a difficult job to replace the plastic manifold and the gasket yourself.

> I am in the process of replacing the head gasket on my 1990 4Runner > with ... gaskets/seals etc for the BACK timing belt cover ? thnx. Mike K. p.s. I ...

the one who did the work the first time).Problem cured. Made it through ... head gasket and 1 on the intake manifold. Sounds like a common problem on ...

I assume the joker valve or bottom valve gasket are shot. I plan to replace valves this weekend. Is this likely to be as disgusting a job as I am afraid of? I ...

The engine maker(s) does do rigorous, endurance testing of each engine ... pressure needed to maintain the seal of the head gaskets. Then and only then ...

NPT threads DO NOT SEAL BY THREAD DEFORMATION. The design & mfr of the threads create a spiral leak path between the thread crests and valleys. NPT threads, ...

Dec 12, 1998 ... to replace it. As for engine work, did oil changes every 6-9K (all highway miles, very clean running). Did water pump and timing belt every 80K.

... replacing the head gaskets and the intake gaskets and I'd like to reduce ... stainless steel plates held in place by the gaskets are the best we can do.

does NOT work (because everything is soaking wet after a while). [img]http ... to seal beneath the head of a fastener. Lock-OSeals are recommended for ...

Aug 18, 2000 ... Throwing money at an automobile does not put it into proper repair. ... head gasket wanted replacing, but in three weeks they were neither able to

seal or leather washer or pump head or whatever you want to call it will be ... It still works as well as it did when I bought it. Dick Durbin. hippy's ...

Or so I thought... I crimped 1/2" of center solid conductor to the braid and soldered the solid to the pcb. It seems to work but I ...

... gaskets and seals which haven't hardened and thus still seal. --johnny ... I do have a question about the stainless steel muffler that Jim K sells. How ...

What is a K-car? How do I find the fault codes stored in my engine computer? What is an x body? (Where x=A,B,C ...

Mike K who does not log every flight but do shouw the currency requirements. ... > to be a repair station to do it that way. Look at it on say a mag. They